Tulip Puff (Slick) 3D Fabric Paint | Glossy Dimensional Paint 118ml – Lectric Lime

Tulip Slick / Puff 3D Fabric Paint

The Tulip Slick range is now released in updated packaging as Tulip Puff. The formula and performance remain the same.

🧼 Fabric Preparation

• Pre-wash fabric before use (do not use fabric softener).
• Allow fabric to dry completely and iron lightly if needed.
• Place cardboard or plastic inside the garment to prevent bleed-through.

✍ Application

• Shake the bottle well before use.
• Hold upright and apply gentle pressure for controlled flow.
• For clean lines, maintain steady pressure and avoid dragging the tip harshly across the fabric.
• Allow the design to dry flat.

⏳ Drying Time

• Let dry for at least 4 hours.
• Wait 72 hours before washing to ensure full curing and durability.

🧺 Washing & Care

• Turn garment inside out before washing.
• Use a gentle cycle with mild detergent.
• Air dry for best long-term results.

Once properly cured, the paint remains flexible and resists cracking.

✨ Pro Tips

• For a stronger 3D effect, apply a slightly thicker line before steam activation.
• Allow each layer to dry before adding additional details.
• Light colors create bold contrast on dark fabrics.

❓ Slick vs Puff – Is it the same product?

✔ Yes. It’s the same formula under a new name.

Tulip has updated the packaging and branding of the Slick Dimensional Fabric Paint line, which is now released as Puff Fabric Paint.

The formula, performance and finish remain the same — only the name and bottle design have changed.

💡 What does this mean for you?

• Whether you buy Slick or Puff, you are getting the same dimensional fabric paint.
• The glossy, raised finish remains unchanged.
• Drying time and care instructions are the same.

🔥 What about steam “puff” activation?

Steam activation applies only to versions specifically labeled as Puff finish.
Classic Glossy/Slick finishes already dry with a raised dimensional effect and do not require additional puff activation.